BERNINA kružna vodlica br.83
Circular Embroidery Atachment
Circular embroidery attachment #83
Happy all around
- For decorative circles and semicircles
- Can be used for different diameters
- Use with utility, decorative stitches or alphabets
- Also suitable for appliquéing ribbons
- For 5.5 mm and 9 mm machines
The attachment is screwed to the free-arm.
The center of rotation can be either to the right or left of the needle,
with the attaching screw lying flat enough to allow the fabric to feed
smoothly over it.
A diameter of between 1 inch and 5-5/16 inches (2.5 cm and 13.5 cm) can be set on the slide.
The fabric must be properly reinforced for circular embroidery,
so 2-3 layers of stabilizer should be placed under your project.
The fabric is put onto the pin at the center of the desired circle
and held in place with a rubber cap to prevent shifting during sewing.
The Circular embroidery attachment #83 can be used in conjunction with
various presser feet, and will enable you to sew circles with any decorative
stitches you wish, and even arrange lettering in a circle.
The circular embroidery attachment lets you sew perfectly round circles in various diameters.
It attaches to the freearm.
Use the slider to set any diameter from 7.5cm (3 inches) to 25cm (10 inches).
We recommend to reinforce the area to be embroidered with stabilizer.
The circular embroidery attachment can be used with any presser foot and any stitch pattern.
For instance, use decorative stitch patterns or lettering
to create circles or circle sections of stitched lines or lettering.